Description

Polymer80 PF940C Jig Kit For PF940C Frame Blanks

If you are building your own PF940C frame, the jig is the part that turns a block of polymer into a working frame. The Polymer80 PF940C Jig Kit for PF940C Frame Blanks gives you the precise alignment and drilling guides needed to complete your compact build. This is the same jig design that Polymer80 ships with their complete frame kits, sold here as a standalone unit. Whether you lost your original jig, need a spare for a second build, or are buying a bare frame blank separately, this jig kit keeps your project moving forward without guesswork.

Overview

This jig kit is purpose-built for the PF940C compact frame blank. It holds your frame in place while you drill the pin holes, cut the recoil spring channel, and complete the trigger housing pocket. The kit includes the jig block, alignment pins, drill bits, and a locking block spacer. Everything you need to finish a PF940C frame is right here. No modifications or third-party parts are required. The polymer80 pf940c jig kit for pf940c frame blanks is a direct replacement or first-time purchase option for anyone working with the compact frame.

Features & Specs

This jig is machined from durable, impact-resistant polymer. It features hardened steel drill guides to keep your bit straight and centered. The clamping system secures the frame blank firmly, preventing movement during drilling. The kit includes the correct 3mm, 4mm, and 5mm drill bits, along with the 3mm and 4mm alignment pins. The locking block spacer is pre-installed and ready to use.

• Precision-machined polymer jig block with steel drill bushings for accurate hole placement on PF940C frames
• Includes three HSS drill bits (3mm, 4mm, 5mm) and two stainless steel alignment pins
• Integrated locking block spacer and trigger housing pocket guide for a complete frame finish

All components are made in the USA and meet Polymer80’s original factory specifications. The jig is reusable and can be used for multiple builds as long as the drill bits and pins are maintained.

Who It’s For

This jig kit is for the home builder who wants to complete a PF940C frame blank from scratch. It is ideal for anyone who has purchased a bare frame blank without the jig, or for builders who need a backup jig for a second project. If you are comfortable with basic hand tools and following a step-by-step build guide, this jig kit gives you the control and precision to finish the job. The polymer80 pf940c jig kit for pf940c frame blanks is also a good choice for experienced builders who want a dedicated jig for compact frames and do not want to swap parts between different frame sizes.

• Home builders completing a PF940C frame blank for the first time or as a spare
• Experienced builders who prefer a dedicated jig per frame size instead of swapping adapters
• Anyone who needs a replacement jig for a lost or damaged original kit

Shipping & FFL

The Polymer80 PF940C Jig Kit for PF940C Frame Blanks ships directly to your door. This is a firearm component, not a complete firearm, and it does not require transfer through a Federal Firearms License (FFL) dealer. However, you must comply with all local, state, and federal laws regarding firearm frame manufacture. It is your responsibility to ensure the frame blank you use is legal to own and complete in your jurisdiction. We recommend checking your state and local regulations before purchasing. By completing the frame, you assume full legal responsibility for the finished product. No FFL transfer is required for the jig kit, but the frame blank itself may have its own FFL requirements depending on your location. Always verify your legal ability to manufacture a firearm frame in your area.

• This jig kit ships via standard ground service with no FFL transfer required
• Buyer is responsible for understanding all applicable laws regarding frame completion in their state
• Frame blanks sold separately may require FFL transfer depending on local regulations